• Open Hours
  • Mon–Fri 7:00 AM – 6:00 PM

Tile Roof Repair Contractor in Queens, NY

Tile roof repair contractor Foundry Roofing repairs clay, concrete and Spanish tile roofs across Queens. We reset slipped tiles, replace broken ones with a color and profile match, and stop the leak.

We work on single-family homes and townhouses through multi-family, co-op and commercial buildings.

Repaired clay tile roof on a Queens townhouse, with the replaced tiles matching the weathered color and curve of the original field Color & profile matched
Tile matching

Clay, concrete and Spanish tile, matched by type

Off-shade or off-profile replacements show from the street and leave gaps at the lap.

Tile type Clay Concrete Spanish / barrel
What breaks Freeze-thaw cracks Impact cracks, worn color Slipped courses, split caps
How we match Color and profile from salvage stock Profile matched, color toned to weathered field Same curve, taper and size
Usual repair Replace Replace or reset Reset and re-bed

If your tile is discontinued, we take matches from a hidden slope and set the new tiles there. If the roof proves to be slate, it needs a slate specialist's repair.

Tile replacement

Replacing one tile and leaving its neighbors whole

The test of a tile roof repair contractor is whether the neighboring tiles survive the visit. We work off roof ladders and lift tiles, never pry them.

  1. Support the course above

    Wedges hold the overlapping tiles clear.

  2. Remove the broken tile

    We cut its nails or wire hooks and slide it out.

  3. Check underneath

    Torn underlayment or a soft batten gets fixed while the opening exists.

  4. Set and re-seat

    The matched tile is fastened and the course drops back into its lap.

Under the tiles

Underlayment, flashing, ridge and hip

Tile roofs usually leak below or around the tiles. Underlayment wears through, flashing fails at walls, chimneys and valleys where two tiled slopes meet, and ridge and hip mortar cracks after freeze-thaw winters. After wind or storm damage, we document broken tiles for an insurance claim.

Our inspection finds the leaking layer before any tile comes off. Then we patch underlayment, rebuild flashing or re-bed ridge and hip tiles in fresh mortar.

Ridge tiles re-bedded in fresh mortar beside new step flashing at a chimney on a Queens tile roof Leak traced first
Tile roof repair questions

Tile roof repair, answered

Can tile roofs be repaired instead of replaced?

Yes. We replace the broken tiles and repair the layer beneath, and the rest of the roof stays.

Can you match my existing tile?

Yes. We bring sample tiles to the roof and match color and profile against yours.

Can a roof tile be replaced from inside the attic?

Sometimes, on open battens. A proper fix and leak check is done from the roof.

Who repairs roof tiles on a co-op or apartment building?

We do, with scope and photos prepared for the co-op or condo board's sign-off.

Free estimate

Get a matched-tile repair priced

Tell us which tile broke and where water shows. We will inspect, match your tile and price the repair free.

We repair tile on Queens townhouses, single-family homes, multi-family and apartment buildings, co-ops, condominiums, and mixed-use and commercial properties.

Request my free estimate

Free Roof Estimate

Commercial, multi-family or a single home in Queens: leave your details and a Foundry estimator will call you back to set up a visit to the roof.

Call for a free estimate (929) 419-4893
or

No obligation. We only use your number to call you about this roof.